LAURA MCGHEE TECH SPEC

STAGE SET-UP

Vocal mics ....................sm57 or sm58 x4
Electric fiddle.................sennheiser radio pack
Acoustic fiddle...............sm57 x1
Acoustic guitar...............DI x1
Mandolin.......................DI x1
Electric guitar................DI x1
Bass...............................DI x1
Keys..............................DI x1
Drums
Kick..............................sm91 x1
Snare............................sm57 x1
Hats..............................Cond x1
Rack.............................sm98 x1
Floor.............................sm98 x1
Over Heads...................cond

SYSTEM SPECIFICATIONS

Front of House;
01 Midas XL3, 40ch console or better
01 KT DN360, 2x31 band Eq
01 sde3000 delay
01 Reverb, lexicon PCM 70
02 multi fx, Yamaha SPX990
04ch Gates, drawmer201
08ch Compressors, dbx160.

** no behringer or alesis units**

Monitors;
01 Midas xl3, 40ch desk.
10ch Equalizers, KT DN360, inserted across desk outputs
14 Active wedges, 115FM or LE700 (in pairs)
10ch Suitable amplification for the above.
06ch Compressors, dbx160 or bss402.
01 Reverb, TC m2000


please note;
*** passive wedges and/or Yamaha 2031s are NOT acceptable under any circumstances***

BACKLINE SPEC

PA / MONITOR TECH RIDER



FRONT OF HOUSE



System must be stereo with loud enough speakers to cover the auditorium.  It is important to understand the highly dynamic nature of the performance when calculating the amount of loudspeakers.


FOH CONTROL GEAR

40 Channel mixer (Midas XL3, Yamaha PM4000)

3 x multi effects processors (Lexicon PCM70, Roland 880, AMS, Rev7)

1 x Digital Delay (Roland SDE 3000)

4 x Dual Compressors/ Limiters (BSS/Drawmer)

1 x BSS 901 Active EQ for Insert on centre vocal

1 x Cassette Deck (playback and record)

2 x 31 band graphic EQ (Klark Technic), for insert on FOH mix and for SOLE use of engineer.  (If a Digital EQ is on the system, please use the Klark Technic Graphic EQ in line.)

3 station intercom connecting FOH, Monitor, and Stage right

1 x CD player

1 x DAT (Play and Record)




MONITOR SPEC/ CONTROL GEAR

40 channel mixer (midas XL3)

8 pairs of identical active wedges 15" LF 2" HF

4 comps

1 compressor/ limiter for in-ear monitoring (lead vocal)

1 SPX 90

10 identical graphics (Klark Technic)

*no yamaha 2031

*no side fills

*no drum fills

passive wedges are NOT acceptable



POWER SUPPLY

220 volt live, neutral and earth, with UK style 3 pinsockets stage left and right.

(If UK voltage and/ or sockets are not available please supply suitable plugs to fit your system and contact Phil Ferns to discuss).

Power distribution is the responsibility of PA company.  All distribution sockets must be properly fuse-rated and have individual RCBs on each point



RISERS

1 x 8' x 12"-18" for drums

1 x 8' x 6" 6